7.3L Power Stroke and Navistar T444E Sleeve Extractor and Install tool. Part # ZTSE4683
$325.00
Details
- MSRP: $399.00
- You Save: $74.00 (19%)
- Brand: Diamond Diesel Service
- Condition: New
- SKU: ZTSE4683
- Manufacturer Part Number: ZTSE4683
- California Prop 65 Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
1994-2003
7.3L Power Stroke
F Series, E Series & Excursion
and
Navistar T444E
Sleeve Extractor and Install tool.
7.3L Power Stroke
F Series, E Series & Excursion
and
Navistar T444E
Sleeve Extractor and Install tool.
(This Sleeve Tool is made 100% made in the USA!)
The 7.3L Power Stroke and Navistar T444E engine injectors sit in a brass sleeve that separates the injector, and fuel, from the engine's coolant. These brass sleeves weaken and fatigue from age and tend to split and fail. A common symptom is finding fuel in your cooling system. This happens because the fuel system typically operates at around 60 psi of pressure, whereas the coolant system operates at a much lower pressure so the fuel gets pumped into the coolant when the sleeve fails and cracks. We offer these custom made tools to simplify the changing of the sleeves. By design, the tools are shorter than an injector so you can change the sleeves with the heads on the motor and the motor still in the truck since there is no slide hammer required like with some other sleeve tools.
These tools are Black Oxide and Hard Coat Anodized for long life.
You can replace your sleeves as preventative maintenance now,
or replace them later once you detect signs of of failure.
Sleeve Tool Instructions:
7.3L Ford Power Stroke
Navistar T444E
Important Note:
This tool is non-returnable.
Be sure you need it and want it before you buy it.
You will be asked to confirm, prior to shipping,
that you agree to the non-returnable terms.
The reason we have this policy is because people have been known
to purchase the tool, use the tool, then return it for a refund.
We can't & won't re-sell a used tool or returned tool.
The 7.3L Power Stroke and Navistar T444E engine injectors sit in a brass sleeve that separates the injector, and fuel, from the engine's coolant. These brass sleeves weaken and fatigue from age and tend to split and fail. A common symptom is finding fuel in your cooling system. This happens because the fuel system typically operates at around 60 psi of pressure, whereas the coolant system operates at a much lower pressure so the fuel gets pumped into the coolant when the sleeve fails and cracks. We offer these custom made tools to simplify the changing of the sleeves. By design, the tools are shorter than an injector so you can change the sleeves with the heads on the motor and the motor still in the truck since there is no slide hammer required like with some other sleeve tools.
These tools are Black Oxide and Hard Coat Anodized for long life.
You can replace your sleeves as preventative maintenance now,
or replace them later once you detect signs of of failure.
Sleeve Tool Instructions:
7.3L Ford Power Stroke
Navistar T444E
Important Note:
This tool is non-returnable.
Be sure you need it and want it before you buy it.
You will be asked to confirm, prior to shipping,
that you agree to the non-returnable terms.
The reason we have this policy is because people have been known
to purchase the tool, use the tool, then return it for a refund.
We can't & won't re-sell a used tool or returned tool.
Click an image for Slideshow
